HG Power Glue Super glue kit with granules 20G+40G

EXTREMELY STRONG INDUSTRIAL ADHESIVE

SUITABLE FOR ALMOST ALL MATERIALS!

This industrial adhesive cannot be compared with other types of glue. It is ideal for filling and repairing cracks or holes, reinforcing materials, copying of broken parts and of course for connecting materials.

After curing the glue it can be immediately mechanically modified, sanded, drilled and painted over. Each package contains two bottles. One bottle contains the granules and the other bottle contains the actual glue. By applying the glue to the granules, you get a chemical reaction so that the powder cures immediately and connects the two materials together. The granules are immediately hard and you do not have to wait anymore.
The glue can also be used without the granules!

THAT’S WHY HG POWER GLUE

• For professional and private use
• Welding without welding device
• Can be used for up to 2 years after opening
• Special cap that always stays clean
• Filling cracks and holes
• Strengthening materials
• Connecting materials
• After curing mechanically editable

This glue repair kit is called “Schweißnaht aus der Flasche” (weld seam from the bottle) for a good reason. The unique mixture of granules and industrial glue is many times more efficient than conventional glues and “welds” cracks and fills holes and crevices like no other glue did before. This adhesive repair kit is suitable for almost all materials and with the right pre-treatment is extremely strong. The welded seam is weather-resistant, cold- and heat-resistant and waterproof.

Two components for maximum grip

The “Schweißnaht aus der Flasche” is delivered in two bottles. One contains the extremely strong industrial adhesive HG-Extreme 1.0, the other the specially adjusted granules. Only the combination of the two components leads to a chemical reaction that produces an indescribable adhesive force. With the aid of the granules, broken parts or wires can be remodeled and even sharpened.

DESCRIPTION

Contents: 1 x industrial adhesive 20 g, 1 x granules 40 g

INSTRUCTIONS FOR THE HG ADHESIVE REPAIR SET

1. CLEANING THE SURFACES

The “Schweißnaht aus der Flasche” (weld seam from the bottle) can only develop its full adhesive strength if the parts to be repaired are prepared accordingly. Ideally, the surface is roughened with sandpaper or a wire brush and all dirt is cleaned. There must be no dust, rust, grease or glue residues and the adhesive surfaces must be completely dry. Only then can high adhesion values ​​be achieved.

2. SCATTER THE GRANULES

Subsequently, the parts to be bonded are joined exactly at the breaking point and a fine layer of granules is applied. The powder height must not exceed 2 mm. Before the industrial adhesive is added, no chemical reaction takes place.

3. APPLY INDUSTRIAL GLUE

Now the industrial adhesive HG-Extreme 1.0 of the second bottle is carefully dripped onto the granules until all grains are saturated with glue. As soon as the two components come into contact with each other, a chemical reaction occurs and heat is generated. We always recommend providing both sides of the break with a weld for maximum durability. The more often the glue process is repeated, the more stable the connection becomes.

4. CURE THE CONNECTION

After only a few seconds, the welded seam reaches its full adhesive power. When the chemical reaction is complete, the seam can be ground, drilled or painted immediately. Depending on the material, the final strength of the fracture may vary.